| Eigenschaften |
| Montageart | 19" |
| PoE | PoE-af (15W), PoE-at (30W) |
| Management | Management |
| Speisung | 110/230VAC |
| Technische Daten |
| Kupfer Ports | 26 x 10/100/1000TX, RJ45, 24 davon mit PoE+ 802.3af/at, Maximale PoE-Leistung über alle Ports: 185W |
| LWL Ports | 2 x 100/1000, SFP (Combo), Wir empfehlen die Verwendung unserer barox-SFPs. Die Kompatibilität unserer Geräte mit SFPs anderer Fabrikate wird von uns nicht geprüft und nicht garantiert. |
| Konsolenport | RS232, RJ45 |
| Speisespannung | 100-240VAC, 50-60Hz |
| Leistungaufnahme | Max. 40W (ohne PoE) / 255W (mit PoE 185W) |
| MTBF | 25°C: 266'508h, 40°C: 158'506h |
| Betriebstemperatur | 0°C bis 40°C |
| Verlustleistung | 181 BTU/h |
| Abmessungen | 442 x 211 x 44mm (BxTxH) |
| Backplane | 52GBit/s |
| MAC Tabelle | 8k |
| Konfiguration | Konsole, Web GUI, SNMPv1, v2c und v3 |
| Porteinstellungen | Port disable/enable. Auto-negotiation 10/100/1000Mbps. Flow Control disable/enable. Datenrate Kontrolle auf jedem Port. Max. Framesize, Power Control |
| Port Statusanzeige | Anzeige pro Port: Geschwindigkeit Link Status, Flow Control Status. Auto negotiation status, trunk status. |
| Layer3 Funktionen | IPv4 und IPv6 Unicast: statisches Routing |
| VLAN | 802.1Q Tagged based VLAN, bis zu 255 VLAN-Gruppen, Q-in-Q, private VLAN |
| Link Aggregation | IEEE 802.3ad LACP / Static Trunk,unterstützt 18 Gruppen von 8-Port trunks oder static trunk |
| QoS | Traffic classification basiert, Strict priority und WRR, 4-level priority für Switching, - Port Nummer, - 802.1p priority, - DS/TOS field in IP Packet |
| Security | SSH v1 und v2, SSL, 802.1X RADIUS, Port Security, ACL mit MAC, IP, Multicast u.v.a., Benutzerauthetifizierung mit privatem Schlüssel |
| Multicast | IGMP v1/v2/v3 snooping, bis 1024 Multicast Gruppen, Source-Specific Multicast, IGMP Proxy |
| Topologie | STP, RSTP, MSTP |