THT-Stiftleiste, Lötstift 1,0 x 1,0 mm, abgewinkelt, Rastermaß 5 mm, 13-polig, grau

SM 222 (222-2BL10)

Technical Data

Order no.: 222-2BL10
Type: SM 222

General Information:

• Note: -
• Features: 32x DO, DC 24 V, 1 A, 2 groups each 16x DO
• Total current per group: 10 A

Current Consumption/Power Loss:

• Current consumption from backplane bus: 180 mA
• Power loss: 6.5 W

Technical Data Digital Outputs:

• Number of outputs: 32
• Cable length, shielded: 1000 m
• Cable length, unshielded: 600 m
• Rated load voltage: DC 20.4...28.8 V
• Current consumption from load voltage L+ (without load): 15 mA
• Total current per group, horizontal configuration, 40°C: 10 A
• Total current per group, horizontal configuration, 60°C: 10 A
• Total current per group, vertical configuration: 10 A
• Output current at signal "2,5 cm ( 1 Zoll ), rated value: 1 A
• Signal logic output: Sourcing output
• Output delay of 0 cm ( 0 Zoll ) to "1: 150 µs
• Output delay of 2,5 cm ( 1 Zoll ) to "0: 100 µs
• Minimum load current: -
• Lamp load: 5 W
• Parallel switching of outputs for redundant control of a load: not possible
• Parallel switching of outputs for increased power: not possible
• Actuation of digital input: yes
• Switching frequency with resistive load max.: 1000 Hz
• Switching frequency with inductive load max.: 0.5 Hz
• Switching frequency on lamp load max.: 10 Hz
• Internal limitation of inductive shut-off voltage: L+ (-52 V)
• Short-circuit protection of output: yes, electronic
• Trigger level: 1.5 A
• Number of operating cycles of relay outputs: -
• Switching capacity of contacts: -
• Output data size: 4 Byte

Status Information, Alarms, Diagnostics:

• Status display: green LED per channel
• Interrupts: no
• Process alarm: no
• Diagnostic interrupt: no
• Diagnostic functions: no
• Diagnostics information read-out: none
• Supply voltage display: green LED per group
• Group error display: red SF LED
• Channel error display: none

Isolation:

• Between channels: -
• Between channels of groups: to 16
• Between channels and backplane bus: yes
• Insulation tested with: DC 500 V

Datasizes:

• Input bytes: 0
• Output bytes: 4
• Parameter bytes: 0
• Diagnostic bytes: 0

Housing:

• Material: PPE / PA 6.6
• Mounting: Profile rail 35 mm

Mechanical Data:

• Dimensions (WxHxD): 50.8 mm x 76 mm x 88 mm
• Net weight: 150 g
• Weight including accessories: -
• Gross weight: -

Environmental Conditions:

• Operating temperature: 0 °C to 60 °C
• Storage temperature: -25 °C to 70 °C

Certifications:

• UL certification: yes
• KC certification: -